2
4
5
6
7
2
Assembly Step 3
Attach Top Panel (H) to the Middle Left Side panel (F), and Middle Right Side Panel (G) by first aligning
the end pipes of Top Panel (H), to the end pipes of Middle Side Panel, then assemble them
by using Long Bolt (4), Ring Washers (2), Nut (5) and tighten using Allen Key (7) and Wrench (6)
Do not fully tighten the bolts.
Caution : Two or three adults required for assembly at this step.
1
Cover all the Bolts using Cap Nuts (1)
Check for stability and then tighten all Bolts at all joints.
Note : DO NOT fully tighten a Bolt in one go and the move on the next.
Rather in sequential manner, gradually tighten each Bolts are evenly secured.
This methodology will ensure maximum evenness once all Bolts are fully tightened.
Assembly Step 4
Assembly Step 5
H
