Linolit SL 330, Инструкция по эксплуатации

Страница: 14 / 27

USE AND MAINTENANCE
- Never use the machine for other purposes than what it
has been constructed for.
- Make sure that all parts are in good operating
condition and that connections are properly connected.
- Never use a machine that is faulty. Carry out the
checks, maintenance and service instructions described
in this manual. Some maintenance and service measures
must be carried out by trained and qualified specialists
(see chapter "Technical maintenance").
- Do not modify safety equipment. Check it regularly to
be sure it works properly. The machine must not be used
with defective or damaged protective equipment.
- Never use a machine that has been modified in any
way from its original specification.
- Use only original spare parts. For more information,
contact the dealer.
- Run the machine only when the grinding head is on the
ground, except in case of checking the equipment as
described in this manual.
- Do not run the machine if the edge with the protective
cover is not fixed. For security purposes the connection
between the machine and the floor has to be rigid,
especially for dry grinding.
- When grinding, connect the machine to a vacuum cleaner
to remove dust.
- When replacing removable discs, disconnect the machine
from the mains; push the STOP button and remove the plug
from the supply socket.
- After every operation abrasive tools must be
removed.
-13-