
EN
131
In this case:
1. First always disconnect the appliance from the power supply.
2. Take out baskets.
3. Remove the
fi
lters.
4. Scoop out water, use a sponge if required.
5.Check the area and remove any foreign objects.
6. Install
fi
lters.
7. Re-insert baskets.
8. TROUBLESHOOTING
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
P1
P2
1/2
3 h
6 h
Water inlet system failure
Make sure the water inlet tap is open and
water is
fl
owing.
Separate the inlet hose from the tap and
clean the
fi
lter of the hose.
Contact for service if the error continues.
Pressure system failure
Contact for service.
Continuous water input
Close the tap and contact for service.
Inability to discharge water
Water discharge hose and
fi
lters may be
clogged.
Cancel the programme.
If the error continues, contact for service.
Contact for service.
Faulty heater
Contact for service.
Over
fl
ow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic card
Contact for service.
Overheating
Contact for service.
Faulty heater sensor
Contact for service.
Hihg voltage failure
Contact for service.
Low voltage failure
Contact for service.