EN
137
REPLACING THE LAMPS
12. AUTHORIZED SERVICE
If Lighting is Not Functioning:
• Make sure that the plug is plugged in, and that the fuses are
intact.
• Check the bulbs. Make sure you unplugged the device before
performing this check. Tighten the bulbs if they are loose; you
can replace the bulbs if they still don‘t work.
Possible Faults and Things that You can do Before Calling
Technical Service:
A) If the device does not run in any way:
• Check to see if the hood is plugged in or if the plug is
fi
t
properly into the socket.
• Check the fuse, to which the appliance is connected, as well
as the main fuse of your house.
Only self-protection tungsten LED lamp, LED or self-protection
metal halide lamp must be used.
Ensure that the lamp is popping out by pressing the lamp from
behind. Remove the lamp by turning a quarter of a round in coun-
terclockwise (Fig. 26).
Replace the lamp by installing a new lamp with the same speci-
fi
cations (Fig. 27).
IEC
Fig. 25: LED
lamp symbol
Fig. 26
Fig. 27
AUTHORIZED SERVICE