Linn MIMIK, Руководство пользователя

Страница: 10 / 27

4
NSTALLATION Your Linn retailer will install your MIMIK for
you if you wish and help you with any problems, or you can
install it yourself. If you are in the UK and want some advice you
are welcome to phone our Customer Services on:
FREEPHONE 0500 888 909.
If you are installing your MIMIK yourself, proceed as follows:
Unpack the MIMIK and retain the packing for future transportation.
Check the contents are as follows:
MIMIK CD player Remote handset
Owner's manual Mains lead
1 spare fuse 1 pair phono-phono leads
WARNING: DO NOT CONNECT THE MAINS SUPPLY.
VOLTAGE SELECTION
The MIMIK is factory set for a 240 Volts mains
supply and must not be connected to a mains supply before it is
adjusted for your local voltage and fitted with the appropriate fuse.
To set the voltage, rotate the voltage selector on the
underside of the product until the appropriate voltage is
aligned with the white marker.
To fit the fuse, first identify the correct fuse for
your local voltage - 400mA antisurge for 220V and
240V, 800mA antisurge for 100V and 120V. Pull
open the fuse drawer which is at the left-hand side
of the mains inlet on the back panel, insert the fuse
in the rear compartment and close the drawer.
WARNING: THIS APPLIANCE MUST BE EARTHED.
WARNING: USE THE EARTHED MOULDED MAINS LEAD
SUPPLIED. NEVER USE AN UNEARTHED PLUG OR ADAPTOR.
I