Linn Majik-I, Руководство пользователя

Страница: 16 / 36

Connecting headphones
Connecting to an AUX source, e.g. MP3 player
Connecting to the mains supply
Important – Do not connect to the mains supply until all other connections have
been made. All products in the system must be powered down while connecting/
disconnecting.
The unit must always be earthed when connected to mains power. Use
the earthed, moulded mains lead supplied. Never use an unearthed mains plug,
socket or adaptor with this unit. The mains lead supplied may be fitted with a
fused plug, depending on local regulations. If this is the case, always replace this
fuse with another of the same type and rating.
Your Majik-I can be connected to any worldwide mains voltage with no
adjustment. The Majik-I incorporates Automatic Voltage Selection (AVS)
and the power supply automatically adjusts for the incoming mains supply.
The unit uses a switch mode power supply (SMPS) in place of the bulky, heavy,
noisy and inefficient transformer (and associated circuitry) found in conventional
designs. This Linn designed power supply provides excellent tolerance to lesser
quality mains supplies, allowing it to perform at close to its best, even with
supplies that are quite badly corrupted.
AUX
MAJIK-I
8
Note:
Audio output to loudspeakers will be muted when headphones are connected.
Notes:
The AUX source will be automatically selected as the current source when a jack is
connected.
The volume of the AUX source should be adjusted to provide the best performance
without distorting the audio.
FROM AUX SOURCE
FROM HEADPHONES