Linn LOUDSPEAKERS Скачать руководство пользователя страница 6

6

AINTENANCE/SERVICE   Linn speakers require no internal maintenance,
and on no account should you try to remove either the back panel or any
of the drive units.

Should any problems arise, contact the supplier prior to returning the
speakers.  Always return the speakers as a pair, even if the fault only
manifests itself on one speaker.

Always use correct original packing in order to reduce the risk of transit
damage.  When shipping Saras and DMS/PMS, the treble unit should be
protected from accidental damage by some adhesive tape.
If you are in any doubt as to the packaging, always consult your supplier, who
may be able to supply a replacement set if necessary.

ENERAL   Care should be taken to avoid direct heat or sunlight on the
speaker cabinets.  We would recommend using a standard furniture
polish to maintain the finish.

The  Declon grilles on the Sara and the DMS/PMS will, over the years,
accumulate some dust, which can be removed by using the relevant vacuum
cleaner attachment.  Handling of the cone of the treble unit should be avoided,
as this can result in damage to the unit.
Always ensure that the top grilles of the DMS/PMS remain in place to prevent
dust getting into the tweeter, and avoid placing heavy objects on the top of
these speakers, as pressure on the midrange and treble unit can result in
damage.
The Kan grilles are not removable.  Any attempt to remove the grille is liable to
result in damage to either the grille or the cabinet.

M

G

Содержание LOUDSPEAKERS









Отзывы: