Linn KOMPONENT 120, Руководство пользователя

Страница: 8 / 14

Positioning
The KOMPONENT 120 loudspeaker can be placed anywhere you find convenient,
but please consider the following points:
●
For best results, position your KOMPONENT 120 loudspeaker as close as
possible to either your left front or right front loudspeaker. It can be
floor-mounted, shelf-mounted or (using the bracket supplied) wall-
mounted.
●
Experimenting with the position may be necessary in order to match the
sound of the KOMPONENT 120 loudspeaker with other loudspeakers in
your system and the acoustics of the room.
Whichever mounting method you employ, ensure that the KOMPONENT 120 is
held or positioned rigidly, in order to ensure that the movement of the drive
units is converted to sound energy, rather than cabinet movement (in the form
of vibration, wobble etc.).
2
Unpacking
T Th he e K KO OM MP PO ON NE EN NT T 112 20 0 llo ou ud ds sp pe ea ak ke err iis s s su up pp plliie ed d w wiitth h tth he e ffo ollllo ow wiin ng g a ac cc ce es ss so orriie es s::
●
mains lead
●
phono lead
●
wall-mounting bracket kit
●
spike kit
●
set of floor protectors
●
warranty card
●
this manual
●
wall bracket assembly instructions
We recommend that you retain the packaging in case you need to transport the
KOMPONENT 120 loudspeaker at a later date.
Voltage selection
WARNING – Ensure the mains supply is disconnected.
The KOMPONENT 120 is factory-set for a 230 volt mains supply and must not be
connected to a mains supply other than this before it is adjusted for your local
voltage.
KOMPONENT 120
Owner’s Manual
Unpacking, Voltage selection and Positioning
English
UP DOWN FEATURE
Replacing the fuse in the KOMPONENT 120 speaker
Should the mains fuse blow, replace it only with an equivalent part (see table
below). The fuse holder is located just below the mains inlet socket. To replace
the fuse, disconnect the product from the mains supply, remove the fuse using
a flat blade screwdriver, insert a new fuse. If the fuse blows a second time there
is a fault in the product; contact your local retailer.
F Fu us se e s se elle ec cttiio on n tta ab blle e
MAINS INPUT VOLTAGE FUSE TYPE
100V 125V T6.3AL
115V 125V T6.3AL
230V 250V T3.15AL
ENG KOMPONENT Sub 120 3/24/05 1:25 PM Page 8