background image

iii

Important Safety Instructions

UK users please read this important safety information

Fuse replacement

This appliance is fitted with a non-rewireable 13 amp mains plug. The plug contains a 5 amp fuse.

If the fuse has blown it can be replaced as follows:

a)  Pull out the red fuse cover/carrier.

b)  Remove and dispose of the blown fuse.

c)  Fit a new 5 amp BS1362 approved fuse into the carrier and push the carrier back into the plug.

Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact your Linn retailer to

obtain a replacement fuse cover. Fuses are for fire protection and do not protect against electric shock.

Mains plug replacement

Should your mains plug need replacing and you are competent to do this proceed as follows.

If you are in doubt contact your Linn retailer or a competent electrician.

a)  Disconnect the plug from the mains supply.

b)  Cut off the plug and dispose of it safely. A plug with bared conductors is dangerous if engaged in a live socket.

c)  Only fit a 13 amp BS1363A approved plug with a 5 amp fuse.

d) The cable wire colours or a letter will be marked at the connection points of most quality plugs.

Attach the wires securely to their respective points. The Brown wire must go to the Live pin, the Blue wire must go to

the Neutral pin, and the Green/Yellow wire must go to the Earth pin.

e)  Before replacing the plug top ensure that the cable restraint is holding the outer sheath of the cable firmly and 

that the wires are correctly connected.

WARNING

THIS APPLIANCE MUST BE EARTHED.

Waste Electrical and Electronic Equipment (WEEE) Directive

Directive 2002/96/EC of the European Parliament and of the Council

The symbol (right) is shown on this product. It indicates that the product should not be disposed of with
regular household waste, but should be disposed of separately.

Electrical and electronic equipment can contain materials that are hazardous to the environment and
human health and therefore should be disposed of at a designated waste facility or returned to your
retailer for the appropriate recycling to take place (see www.linn.co.uk for further information).

If you wish to dispose of this product and the product still functions, please consider recycling/reusing it
by donating it to a charity shop, selling it or part-exchanging it with your retailer.

Содержание KLIMAX AKTIV
























Отзывы: