Linn KEOSA Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 16

Linn KEOSA Скачать руководство пользователя страница 8

6

BI-WIRING

The Linn KEOSAs are able to be single wired, bi-wired, or bi-amped.

In the SINGLE-WIRED configuration, a single amplifier drives each loudspeaker
through a single loudspeaker cable. The KEOSAs are delivered configured for
this method of operation.

BI-WIRING improves the performance of a loudspeaker. A single amplifier is
still used, but this drives each loudspeaker through two loudspeaker cables,
one for the bass/midrange section, and one for the treble section. By
separating the cables to these sections, interaction between the bass and
treble currents is reduced. The extra cost of an additional pair of loudspeaker
cables is more than justified by the improvement in sound quality gained.

In the BI-AMPLIFIED configuration, two amplifiers are used to drive the
speakers, such that the bass/midrange and treble sections of each loudspeaker
are individually powered by a dedicated amplifier section. Each amplifier
then carries only bass or treble current, which further reduces interaction and
loading of the amplifiers.

«
...
6
7
8
9
10
...
»

Содержание KEOSA

















Отзывы:

Нет отзывов