Linn KEILIDH, Руководство пользователя, Страница: 13 / 19

11
CONFIGURATION
KEILIDHs are supplied configured for use in BI-WIRED mode. The configuration
can be altered by removing or inserting linking plates and blanking plugs as
appropriate on the terminal panel at the rear of the loudspeaker. To install
or remove a linking plate, use the tool provided to remove the correct two
terminal collars, install or remove the two-way linking plate, and replace the
terminal collars. Refer to the pictures overleaf for the correct arrangement of
linking plates for the passive configurations. The AKTIV configurations are
complex and are therefore always installed by a Linn retailer.
IMPORTANT Don't remove all the collars at once. Note that the lowest pair
of sockets is only used in AKTIV mode. Don't connect to them at any other
time.