Linn KAN, Руководство пользователя

Страница: 7 / 14

6
Fitting the grille to achieve a perfect fit is time consuming, so unless
you want to use the speaker without the grille, it is best to leave it on.
To remove the grille, grip the top right hand corner, pulling it so that
the rubber ring and elastic clear the baffle. Then remove the ring and
the grille cloth. To refit the grille, ensure that the shiny side of the
material is to the outside. Find the knotted part of the grille elastic,
and locate it in the slot below the bass driver about a third of the way
in from a corner. Pull the grille up evenly over the baffle. Then find
the joint in the rubber ring and locate it in the same slot about a third
of the way in from the other bottom corner and fit the ring. A plastic
ruler can be used to encourage the material and the rubber ring back
into the slot. (If your KANs are situated above eye-level, the joins in
the grille-cloth and rubber ring will be less noticeable if they are
located in the slot at the top of the loudspeaker.)
knot in grille
joint in ring
MAINTENANCE
The Linn KANs normally need no maintenance, other than occasionally
polishing the cabinet with a soft, slightly damp cloth. Take care not
to touch the drive units behind the grille cloth. If you have to transport
your speakers, remove the BRAKITs if fitted and use the original
packing. Your retailer can provide packing if necessary.