background image

4

INSTALLATION

As installation is the responsibility of your dealer, the Installation section appears at the end of this

manual under the Dealers section.

We recommend that should you require to relocate or transport your Aktiv system, you contact the

dealer and arrange for him to disassemble and reconnect the system.

Contents Information:

The AKTIV is supplied with the following:

1 AKTIV Crossover

6 Interconnect Leads

I  Mains Lead

6 each 6.2K, 3.3K, 1.6K, 750ohm, 330ohm, 130ohm, 0.25W 1% metal film resistors

1 Owner's manual and registration card Labels for interconnecting cables

The Linn 'AKTIV' system comprises:

Sources, e.g. disc, tuner, tape, CD etc.

A Linn LK1 preamplifier

A Linn 'AKTIV' Isobarik crossover

3 Linn LK2 power amplifiers

A pair of Linn Isobarik loudspeakers

Interconnect cables, power cables and speaker cables

GUARANTEE & SERVICE

The AKTIV is guaranteed under the conditions that apply in the country of purchase.  In addition to

any statutory rights the customer may have, we undertake to replace any parts that have failed due

to faulty manufacture.

Keep a copy of the sales receipt, as this will establish the purchase date.  Refer all enquiries to

authorised dealers only.

OWNER REGISTRATION

Please return the enclosed registration form to Linn Products if you are resident in the  UK, or to

your local distributor if you are resident outside the UK. We will add your name to our mailing list

and send you regular news about Linn and hi-fi developments in general.

Содержание ISOBARIK AKTIV










Отзывы: