Linn Classik movie Di, Руководство пользователя

Страница: 25 / 54

19
English
S
etup M
enus
SUBWOOFER
If you have connected a subwoofer - set to ON
If you have not connected a subwoofer - set to OFF
The next menus allow speaker positions to be
described to the CLASSIK Movie System Di so that
the unit can add time delays to certain speakers.
This ensures the sound from all the speakers
reaches your seating position at the same time.
S
etup M
enus
English
19
DIG 1 VIDEO and DIG 2 VIDEO
Same as for the AUX 1 and AUX 2 sources.
TUNER VIDEO
Same as for the AUX 1 and AUX 2 sources.
MAIN VIDEO (for use in a KNEKT system. See KNEKT
documentation)
Same as for the AUX 1 and AUX 2 sources.
VCR VIDEO
Same as for the AUX 1 and AUX 2 sources but OFF and
INTERNAL options are not available.
Audio Setup
SPDIF OUT
If you are using the unit as a stand-alone device, i.e.
without using an external decoding device - set to OFF.
If you are using an external audio decoding device -
set to SPDIF/RAW.
When you are recording to an external digital source
(e.g. DAT player) - set to SPDIF/PCM.
OP (operation) MODE
If you are using speakers other than your TV’s - set to
LINE OUT.
If you are only using your TV’s speakers – set to TV
OUT.
DUAL MONO
This menu is for DVDs which have separate audio
tracks for the left and right channels.
To hear only the left channel - set to L MONO.
To hear only the right channel - set to R MONO.
To combine the discrete left and right channels - set
to MIX MONO.
For normal use (i.e. most DVDs) - set to STEREO.
DYNAMIC
This feature allows you to add compression to the
Dolby Digital audio signal on DVDs. Adding
compression reduces sudden increases in volume,
such as the sound of an explosion. FULL means
minimum dynamic range (maximum signal
compression), OFF means maximum dynamic range
(no signal compression).
To adjust the dynamic setting use / on the
front panel or handset.