LinMot P01-23-HP-SSCP, Руководство по установке

Страница: 15 / 30

Installation Guide Linear Motors ENG
NTI AG / LinMot P01-23-HP-SSCP Seite 15 / 30
Ordering information
Item Description Item-No.
MC01-R/f Motor connector R/f 0150-3129
4.2.2 IP Class IP69k
R-Connector
Material: Stainless steel (1.4404)
Max. torque: 0.6 Nm
Note: This cable connector is used with the assembled
extension cables for the stators with end designation
R20.
Ordering information
Item Description Item-No.
MC01-R/f-IP69K-SSC Motor connector R/f, IP69k, SSC 0150-3347
4.2.3 Pin Assignment Linear Motor
Do not connect or disconnect motor when there is power on the servo drive.
Use only double-shielded original LinMot cable. Cables from other sources must be
checked precisely before commissioning.
Incorrect connections can destroy the drive and stator.
Connector Type R-Connector
Pin
1
Phase1- 2
3
Phase2- 4
+5V A
SIGNAL-GROUND* B
Sensor Sin C
Sensor Cos D
Temp sensor E
SHIELD** of stator and stator
cable
Case
Connector on the stator
(-cables)
Extension cables are double shielded. The two shields of the extension cables must not be
connected together: the inner shield of the extension cables is used as GROUND and must
be connected to SIGNAL-GROUND*; only the outer shield must be connected to SHIELD**
of the connector.
2
4
1
A
B
C
D
E
3