LinMot DM01-23 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 72

background image

Installation Guide Linear Modules

ENG

Page 20 / 72

DM01-23 / 37 / 48

NTI AG / LinMot

6 Start-up

6.1 Plug and Play

LinMot DM01 linear modules are "Plug and Play" capable (see motor label "PnP"). This means that they log
on to the drive independently. The module- and motor-specific parameters are automatically stored in the
drive, and the motor is ready for operation.

6.2 Setting Motor Parameters

To configure the linear module, use the LinMot-Talk software from version 6.9. The software
and the corresponding detailed user manual can be downloaded from

https://linmot.com/download/linmot-talk-drive-configuration/

can be downloaded.

6.2.1 Application-specific Parameters

The various application-specific parameters, such as cable length, load mass, PID control settings, etc. are
set on the drive side via the Motor Wizard in the LinMot-Talk configuration program.

For this purpose, the LinMot-Talk software should be started first. Then the Motor Wizard can be opened.

To open it, please select the "Motor Wizard" icon in the task bar.

The Motor Wizard now guides the user step by step through the menu. The application parameters should
be entered as accurately as possible to ensure the best possible motor control.

6.2.2 Referencing the Linear Module

The built-in linear motor has a position detection system which must be referenced. Various modes are
available to the user for this purpose. Depending on the selected mode, the linear motor searches for a
mechanical stop and/or an electronic switch, for example.

Figure: Selection of reference run linear module

«
...
18
19
20
21
22
...
»

Содержание DM01-23 Series









































































Отзывы:

Нет отзывов

Похожие инструкции для DM01-23 Series

Бренд: S&C Страницы: 40

Бренд: S&C Страницы: 34

Бренд: Zolix Instruments Страницы: 22

Бренд: ZEHUS Страницы: 28

Бренд: Valfonta Страницы: 12

Бренд: ECKELMANN Страницы: 178

Бренд: nekos Страницы: 8

Бренд: nekos Страницы: 8

Бренд: Neles Страницы: 12

Бренд: Yamaha Страницы: 5

Бренд: Yamaha Страницы: 20

Бренд: Yamaha Страницы: 2

Бренд: PUTCO Страницы: 2

Бренд: Centurion Страницы: 16

Бренд: Game ready Страницы: 24

CWDM-CR-B Series

Бренд: Lantronix Страницы: 19

Бренд: Netafim Страницы: 4

Бренд: TREND Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды