background image

D1 User Manual

 

The LinkTap Wireless Water Timer is designed for private use in domestic 
gardens to control sprinklers and watering systems through the LinkTap 
app. The LinkTap's device must not be used for industrial purposes or in 
conjunction with chemicals, dirty water, or easily flammable and explosive 
substance. 

 

Use 4 AA alkaline or 1.5V lithium batteries (not included). Good 

quality 1.5V Li-ion rechargeable batteries can also be used. Do not 
use carbon-zinc batteries.

 

 

Remove the timer from the faucet during freezing weather and 

store inside. 

 Timer should not be submerged in water, used in damp pits or 

buried. 

 

--------------------------------------------------------------------------------------------------- 

Installation 

Step 1: 

Connect LinkTap Gateway to a LAN port of your home broadband modem 
(or a network switch, a router, a hub, a Wi-Fi extender) using the supplied 
ethernet cable. Power on the Gateway using the supplied USB cord and 
power adapter. 3 solid green LEDs (Power, Link and Internet) indicate that 
the Gateway has connected to the LinkTap cloud server. This process may 
take up to a few minutes.

 

Содержание D1












Отзывы: