S
3
features will differ depend-
ing on which connection
type you select.
E
Internet Configuration Type
Automatic Configuration -
DHCP: If you are connecting
through DHCP or a dynamic
IP address from your ISP,
keep this default setting.
Static IP: If your ISP assigns
you a static IP address,
select Static IP from the
drop-down menu. Com-
plete the Internet IP Address,
Subnet Mask, Default Gate-
way, and DNS fields. You
need to enter at least one
DNS address.
PPPoE: If you are connect-
ing through PPPoE, select
PPPoE from the drop-down
menu. Complete the User
Name and Password fields.
PPTP: PPTP is a service used
in Europe only. If you are
using a PPTP connection,
check with your ISP for the
necessary setup informa-
tion.
L2TP. L2TP is used mostly in
Europe. Check with your ISP
for the necessary setup
information.
F
When you are finished
entering your Internet con-
nection settings, click the
Save Settings
button to
save your changes.
G
To configure the Router for
your wireless network, select
the Wireless Tab’s Basic Wire-
less Settings screen.
H
Select the Wireless Network
Mode:Mixed:
If you have Wireless-G and
802.11b devices in your
network, then keep the
default setting, Mixed.
G-Only: If you have only
Wireless-G devices, select
G-Only.
B-Only: If you have only
Wireless-G devices, select B-
Only.
Disable: If you want to dis-
able wireless networking,
select Disable.
I
Wireless Network Name
(SSID). Enter the the network
name used for the devices
in your wireless network.
J
TX Rate Lilmitation. Select
the rate of data transmis-
sion according to the
speed of your wireless net-
wrok.
These instructions will show you
how to configure the Router. You
only need to configure the Router
once using any computer you
have set up.
A
Open your web browser.
Enter http://192.168.1.1 in its
Address field. Press the Enter
key.
B
A password request screen
will appear. Enter the
default user name and
password,
admin
, in lower-
case letters in the User
Name and Password fields.
(For added security, you
should later set a new pass-
word, using the Administra-
tion tab’s Mangagement
screen of the web-based
utility). Then click the
OK
but-
ton.
C
The web-based utility will
appear with the Setup tab
selected. If requested by
your ISP (usually cable ISPs),
complete the Host Name
and Domain Name fields,
and the MTU and MTU Size
fields. Otherwise, leave the
defaults
D
For the Configuration Type
setting, five connection
types are offered through
the drop-down menu. Each
Setup screen and available
M
WRV200-QI-60413NC BW
K
Wireless SSID Broadcast.
When wireless clients survey
the local area for wireless
networks to associate with,
they will detect the SSID
broadcast by the Router. To
broadcast the Router's SSID,
keep the default setting,
Enable
. If you do not want
to broadcast the Router's
SSID, then select
Disable
.
L
WMM. To enable Wi-Fi Multi-
media, select
WMM
.
M
Wireless Channel. Select the
channel to be used by your
wireless network devices.
N
Change these settings as
described here and click
the
Save Settings
button to
apply your changes.
O
Restart your computer.
P
Test the setup by opening
your web browser from any
computer and entering
http://www.linksys.com/reg-
istration
.
Congratulations! The installation of
Wireless-G VPN Router is com-
plete.
Configure the Router
A
C
DHCP
Static IP
PPPoE
PPTP
L2TP
Note:
For more advanced set-
tings and security options, refer to
the User Guide on the Setup Wiz-
ard CD-ROM.
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or email for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
