![background image](http://html1.mh-extra.com/html/linksys/wrt54gv2/wrt54gv2_user-manual_1924876029.webp)
21
Chapter 6: Configuring the Wireless-G Broadband Router
The Setup Tab - Advanced Routing
Wireless-G Broadband Router
The Setup Tab - Advanced Routing
This tab is used to set up the Router’s advanced functions. Operating Mode allows you to select the type(s) of
advanced functions you use. Dynamic Routing will automatically adjust how packets travel on your network. Static
Routing sets up a fixed route to another network destination.
Operating Mode
. Select the mode in which this Router will function. If this Router is hosting your network’s
connection to the Internet, select
Gateway
. If another Router exists on your network, select
Router
. When Router is
chosen,
Dynamic Routing
will be enabled.
Dynamic Routing
. The Dynamic Routing feature enables the Router to automatically adjust to physical changes in
the network’s layout and exchange routing tables with the other router(s). The Router determines the network
packets’ route based on the fewest number of hops between the source and the destination. This feature is
Disabled by default. From the drop-down menu, you can also select,
LAN & Wireless
, which performs dynamic
routing over both your Ethernet and wireless networks. You can also select,
WAN
, which performs dynamic routing
with data coming from the Internet. Finally, selecting
Both
performs dynamic routing with both methods described.
Static Routing
. To set up a static route between the Router and another network, select a number from the Static
Routing drop-down list. (A static route is a pre-determined pathway that network information must travel to reach a
specific host or network.) Enter the information described below to set up a new static route. (Clicking the
Delete
This Entry
will delete a static route.)
Enter Route Name
. Enter a name for the Route here, using a maximum of 25 alphanumeric characters.
Destination LAN IP
. The Destination LAN IP is the address of the remote network or host to which you want to
assign a static route.
Subnet Mask
. The Subnet Mask determines which portion of a Destination LAN IP address is the network
portion, and which portion is the host portion.
Default Gateway
. This is the IP address of the gateway device that allows for contact between the Router and
the remote network or host.
Interface
. This interface tells you whether the Destination IP Address is on the
LAN & Wireless
(Ethernet and
wireless networks), the
WAN
(Internet), or
Loopback
(a dummy network in which one PC acts like a network-
necessary for certain software programs).
Click the
Show Routing Table
button to view the Static Routes you’ve already set up.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 6-13: Setup Tab - Advanced Routing (Gateway)
Figure 6-14: Setup Tab - Advanced Routing (Router)
Содержание WRT54GV2
Страница 17: ...10 Chapter 4 Connecting the Wireless G Broadband Router Hardware Installation Wireless G Broadband Router...
Страница 21: ...13 Chapter 5 Configuring the PCs Configuring Windows XP PCs Wireless G Broadband Router Figure 5 8 IP Address...
Страница 79: ...71 Appendix G Specifications Wireless G Broadband Router...