![background image](http://html1.mh-extra.com/html/linksys/wrt54gl-eu/wrt54gl-eu_user-manual_1924852064.webp)
56
Chapter 6: Configuring the Wireless-G Broadband Router
The Administration Tab - Factory Defaults
Wireless-G Broadband Router
The Administration Tab - Factory Defaults
Click the
Yes
button to reset all configuration settings to their default values, and then click the
Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default.
The Administration Tab - Firmware Upgrade
Firmware can be upgraded by clicking the
Upgrade
button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Router. For more information about upgrading firmware, refer to “Appendix C: Upgrading Firmware”.
The Administration Tab - Config Management
This screen is used to back up or restore the Router’s configuration file.
To back up the Router’s configuration file, click the
Backup
button. Then follow the on-screen instructions.
To restore the Router’s configuration file, click the
Browse
button to locate the file, and follow the on-screen
instructions. After you have selected the file, click the
Restore
button.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes
Figure 6-43: Administration Tab - Firmware Upgrade
Figure 6-42: Administration Tab - Factory Defaults
Figure 6-44: Administration Tab - Config Management