Chapter 3
Configuration
5
Dual Band Wireless-N Notebook Adapter
Site Information
For each network selected, the following settings are
listed:
Wireless Mode
This is the mode of the wireless network
currently in use.
Network Type
This is the network type used by your
wireless network.
Radio Band
This is the radio band used by your wireless
network.
Security
This is the status of the wireless security
feature.
MAC Address
This is the MAC address of the wireless
network’s access point.
Refresh
Click
Refresh
to perform a new search for
wireless devices.
Connect
To connect to one of the networks on the list,
select the wireless network, and click Conn
ect
. If the
network’s wireless security is enabled, then one of these
wireless security screen appears:
WEP
If the network has the wireless security WEP encryption
enabled, then you see the WEP Key Needed for Connection
screen. Select the appropriate level of WEP encryption,
64-bit
or
128-bit
. Then enter the network’s Passphrase
or WEP Key. Click
Conne
ct. To cancel the connection, click
Cancel
.
WEP Security
WPA
If the network has the wireless security WPA Personal
security enabled, then you see the WPA Personal Needed
for Connection screen. Select the appropriate encryption
type,
TKIP
or
AES
. Enter the network’s Pre-shared Key in
the
Pre-shared Key
field. Then click
Connect
. To cancel the
connection, click
Cancel
.
WPA-Personal Security
WPA2
If the network has WPA2 Personal wireless security
enabled, then you will see the WPA2 Personal Needed for
Connection screen. Enter the network’s Pre-shared Key in
the
Pre-shared Key
field. To connect to the network, click
Connect
. To cancel the connection, click
Cancel
.
WPA2-Personal Security
Profiles
The
Profiles
screen lets you save different configuration
profiles for different network setups. The table on the left
displays a list of available profiles with their profile names
and wireless network names.
Profiles