5
Needed for Connection
screen will appear. If your
network uses WPA Personal
security, the
WPA-Personal
Needed for Connection
screen will appear. If your
network uses PSK2 (Pre-Shared
Key 2) security, the
PSK2
Needed for Connection
screen will appear.
WEP Key Needed for
Connection
Select the level of encryption
you want to use,
64-bit
or
128-bit
. Then, enter a
passphrase or WEP key.
Passphrase
- Enter a
passphrase, so a WEP key is
automatically generated. The
passphrase is case-sensitive
and should not be longer than
31 alphanumeric characters.
WEP Key 1
- For 64-bit
encryption, enter exactly 10
hexadecimal characters. For
128-bit encryption, enter
exactly 26 hexadecimal
characters. Valid hexadecimal
characters are “0” to “9” and
“A” to “F”.
Then, click
Connect
.
WEP Key
NOTE:
Your passphrase is
compatible with Linksys wireless
products only. (Non-Linksys
wireless products will require a
WEP key.)
IMPORTANT:
All of the devices on
your network must use the same
security method in order to
communicate with each other.