![background image](http://html1.mh-extra.com/html/linksys/wap200/wap200_user-manual_1925189040.webp)
34
Chapter 6: Configuring the Wireless-G Access Point
The Administration - Management Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Security Monitor Server
This is a special Syslog server that can record all security monitor events instead of selected events.
Server IP Address
. Enter the IP address of the server.
The Administration - Management Tab
On this screen you can configure the password, Web Access, and SNMP settings.
Management
You should change the username/password that controls access to the Access Point’s web-based utility to
prevent unauthorized access.
Local AP Password
User name
. Modify the administrator user name. The default is
admin
.
AP password
. Modify the administrator password for the Access Point’s web-based utility. The default is
admin
.
Re-enter to confirm
. To confirm the new password, enter it again in this field.
Web Access
To increase the security on accessing the web-based utility, you can enable HTTPS. Once enabled, users need to
use
https://
when accessing the web-based utility.
Web HTTPS Access
. The default is
Disabled
.
Wireless Web Access
. Allow or deny wireless clients to access Web based Utility. The default is
Disabled
.
Figure 6-22: Administration - Management
Содержание WAP200
Страница 70: ...64 Appendix H Regulatory Information Wireless G Access Point with Power Over Ethernet and Rangebooster...
Страница 71: ...65 Appendix H Regulatory Information Wireless G Access Point with Power Over Ethernet and Rangebooster...
Страница 72: ...66 Appendix H Regulatory Information Wireless G Access Point with Power Over Ethernet and Rangebooster...