10
Chapter 3: Using the Bluetooth USB Adapter
The Bluetooth Setup Wizard
Bluetooth USB Adapter
I know the service I want to use and I want to find a Bluetooth device that provides that service.
After you select this option from the Wizard’s menu and click the
Next
button, the
Bluetooth Service Selection
screen will appear. Select the service that you need and click the
Next
button.
Next, the
Bluetooth Device Selection
screen will appear. This screen will list those devices that provide the
service you’ve requested. Chose the device to which you wish to connect and click the
Next
button to continue.
The
Setup Wizard Completion Screen
will appear next. The name of the service will appear at the top of the
screen and you can personalize this if you wish. If you wish to further configure the service you’ve selected, click
the
Configure
button. In most cases, further configuration is not required. To start the connection upon
completing the Wizard, select the
Start the Connection
option. A shortcut to this device will be placed in the
My
Bluetooth Places
folder. To create more shortcuts in addition to the one created by default and restart the Wizard,
select the
Create a shortcut and then restart this wizard so that I can create additional shortcuts
option.
Click the
Back
button if you with to go back a step, the
Cancel
button if you wish to leave the Wizard without
saving your changes, or the
Finish
button to complete the Wizard.
The Adapter will then try to connect to that device. If a PIN code is required for security, you will be notified. At
this point, you will be asked for your PIN code as well as the PIN code for the other Bluetooth device before the
connection can be completed.
Figure 3-5: The Bluetooth Service Selection Screen
NOTE:
For descriptions of services provided by Bluetooth devices, see that device’s documentation.
Figure 3-6: The Bluetooth Device Selection Screen
Figure 3-7: The Setup Wizard Completion Screen