Linksys SRW224P - 10/100 - Gigabit Switch Скачать руководство пользователя страница 24

Страница: 24 / 69

Chapter 6: Configuring the Wireless-N Access Point
The Wireless - Basic Wireless Settings Tab

Wireless-N Access Point with Power Over Ethernet

The Wireless - Basic Wireless Settings Tab

Change the basic wireless network settings on this screen.

Basic Settings

Configure the Wireless Network basic attributes for this Access Point.

SSID Name

. The SSID is the unique name shared among all devices in a wireless network. It is case-sensitive,

must not exceed 32 alphanumeric characters, and may be any keyboard character. Make sure this setting is the
same for all devices in your wireless network. The default SSID name is

linksys-n

Wireless Network Mode

. Select one of the following modes. The default is

B/G/N-Mixed

B-Only

: All the wireless client devices can be connected to the Access Point at Wireless-B data rates with

maximum speed at 11Mbps.

G-Only

: Both Wireless-N and Wireless-G client devices can be connected at Wireless-G data rates with

maximum speed at 54Mbps. Wireless-B clients cannot be connected in this mode.

N-Only

: Only Wireless-N client devices can be connected at Wireless-N data rates with maximum speed at

300Mbps.

B/G-Mixed

: Both Wireless-B and Wireless-G client devices can be connected at their respective data rates.

Wireless-N devices can be connected at Wireless-G data rates.

G/N-Mixed

: Both Wireless-G and Wireless-N client devices can be connected at their respective data rates.

Wireless-B clients cannot be connected in this mode.

B/G/N-Mixed

: All the wireless client devices can be connected at their respective data rates in this mixed

mode.

Disabled

: To disable wireless connectivity completely. This might be useful during system maintenance.

Wireless Channel

. Select the appropriate channel to be used among your Access Point and your client devices.

The default is channel 6. You can also select

Auto

so that your Access Point will select the channel with the

lowest amount of wireless interference while the system is powering up. Auto channel selection will start when
you click

Save Settings

button, it will take several seconds to scan through all the channels to find the best

Figure 6-4: Wireless - Basic Wireless Settings

Figure 6-5: Pop-up message on Auto Channel Selection

Содержание SRW224P - 10/100 - Gigabit Switch






































































Результаты поиска

Содержание SRW224P - 10/100 - Gigabit Switch

Отзывы:

Похожие инструкции для SRW224P - 10/100 - Gigabit Switch

Бренды по названию

Популярные бренды

Linksys SRW224P - 10/100 - Gigabit Switch, Руководство пользователя

Результаты поиска

Содержание SRW224P - 10/100 - Gigabit Switch

Отзывы:

Похожие инструкции для SRW224P - 10/100 - Gigabit Switch

Бренды по названию

Популярные бренды