![Linksys PCM1000 - Cisco 10/100/1000 CARDBUS MOBILE NIC Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/linksys/pcm1000-cisco-10-100-1000-cardbus-mobile-nic/pcm1000-cisco-10-100-1000-cardbus-mobile-nic_user-manual_1923877010.webp)
6
Chapter 3: Setup and Installation of the Gigabit Notebook Adapter
Hardware Installation
Gigabit Notebook Adapter
3. The driver files will be copied onto your PC.
4. This screen will appear when the installation is complete. Click
Finish
to finish the installation.
Click the
Exit
tab to exit the Utility.
The setup is complete.
Hardware Installation
1. Make sure that your Notebook PC is turned off.
2. Locate your PC’s CardBus slot (usually located on the side). Insert the pin end of the Gigabit Notebook Adapter
into the slot with the LEDs facing up. Make sure that the Adapter seats firmly in place.
3. Connect an Ethernet cable to the Ethernet port on the Adapter, then connect the other end to the Ethernet port
on the switch or other networking device.
The setup and installation are complete.
Figure 3-5: Setup Being Performed
Figure 3-6: Installation Complete