Connect the Transceiver
Insert the MiniGBIC SFP
Module with the printed
side up and the rubber
port cap facing out.
Remove the MiniGBIC SFP
Module’s rubber port cap.
Connect the fiber cable’s
LC connector to the
MiniGBIC SFP Module’s
port.
Connect the other end
of the cable to an SFP
Module to verify that
the fiber connection is
complete.
The Transceiver’s hardware installation is now complete.
1�
A.
B.
C.
D.
Insert the Module
Insert the Module
Remove the Rubber Port Cap
Remove the Rubber Port Cap
Connect the Fiber Cable
Connect the Fiber Cable
Connected Fiber Cable
Connected Fiber Cable
