background image

Linksys Wi-Fi Router 

 

Page 5 of 9 

 

In order to get consistent and repeatable results, we suggest you control the variables of the test: 

o

 

Turn off all interfering devices, for example, wireless routers/access point/wireless range extenders that will not 
participate in the test, Bluetooth devices (e.g. cell phone) and microwave ovens. 

o

 

Use the same location, time of day and equipment 

 

Single-Client Performance Testing

 

 
Objective: To demonstrate the performance brought by 3x3 wireless technology. 
 
We suggest you to use the following setup to conduct performance test:   

 

 

Configure the router with the following settings: 

o

 

Use 

WPA2-Personal

 if you wish to conduct the test with wireless security enabled 

o

 

Set 

Network Mode

 to 

Mixed

 

o

 

If you are testing 5GHz (802.11ac), set

 Channel Width

 to 

80 MHz

 

o

 

If you are testing 2.4GHz (802.11n), set

 Channel Width

 to 

Auto

 

o

 

Select a channel that has the least interference 

o

 

Set 

QoS

 and 

Parental Controls

 set to 

Disabled

 

Place EA9300 and Computer #2, the wireless client, about five (5) meters apart from each other 

Connect Computer #1 with the built-in 

Gigabit

 Ethernet port to one of the EA9300

’s Ethernet (LAN) ports 

Connect Computer #2 wirelessly to one of the three wireless networks of EA9300.  Computer #2 should be 
equipped with a stable 3x3 802.11ac wireless adapter, for example, Macbook Pro (

“late 2013” models or later).  

Please do not use Linksys WUSB6100M to conduct this 3x3 single-client performance test. 

o

 

To test the performance of 802.11ac, connect to one of the two 5GHz networks 

Download iPerf3 (in zip file) from 

https://iperf.fr/iperf-download.php

 to both computers and unzip the file. 

IMPORTANT: Disable firewall, auto software update, screen saver and power save (auto sleep) on all computers.  

To run the test:

 

On Computer #1, open a command prompt window.  Change the current directory to the location where iPerf is installed. 
Then, execute the following iPerf command at the command prompt. 
 

iperf3 -s -f m -i 1 

 

On Computer #2, open a command prompt windows.  Change the current directory to the location where iPerf is installed.  
Then, execute the following iPerf command at the command prompt. 
 

iperf3 -c 

<IP address of Computer #1>

 -f m -i 1 -t 60 -w 1M -P 1

 

 

(For example, 

iperf3 -c 

192.168.1.105

 -f m -i 1 -t 60 -w 1M -P 1

)

 

 

 

MU-MIMO Testing 

Objective: To demonstrate the benefit of MU-MIMO over SU-MIMO. 

Содержание EA9300










Отзывы: