15
To configure your wireless network using WiFi Protected Setup:
If you have client devices, such as wireless adapters that support WiFi
Protected Setup then you can use this feature to configure wireless security
for your network.
There are 3 methods available, use the method that applies to the client
device you are configuring:
1.
Use WiFi Protected Setup button:
- Click or press the
WiFi Protected Setup
button on the client device.
- Within a few minutes, click the
WiFi Protected Setup
button on the
setup screen that appears.
- After the client device has been configured, click
OK
.
- The WiFi Protected Setup Status, Wireless Band, Network Name (SSID),
and Security method are displayed at the bottom of the screen.
2.
Enter WiFi Protected Setup PIN from client device:
Use this method if your client device has a WiFi Protected Setup PIN
number.
- Enter the PIN number in the field on the screen that appears.
- Click
Register
.
- After the client device has been configured, click
OK
. Then refer back
to your client device or its documentation for further instructions.
- The WiFi Protected Setup Status, Wireless Band, Network Name (SSID),
and Security method are displayed at the bottom of the screen.
3.
Enter WiFi Protected Setup PIN from access point on client device
Use this method if your client device requests the Access Point’s PIN
number.
- On the
client’s
WiFi Protected Setup screen, enter the PIN number
listed on the
Access Point’s
WiFi Protected Setup screen. Then click
Register
or the appropriate button. (The PIN number is also listed on
the label on the bottom of the Wireless Access Point device).
- After the client device has been configured, click
OK
. Then refer back
to your client device or its documentation for further instructions.
- The WiFi Protected Setup Status, Wireless Band, Network Name (SSID),
and Security method are displayed at the bottom of the screen.
FibeRG_0110_ENG_V3 15
05/02/10 10:34 AM