background image

EtherFast

®

Cable/DSL VPN Router with 4-Port 10/100 Switch

81

Instant Broadband

®

Series

80

5. If you want to enter a description for your filter, click the Description tab

and enter the description there. 

6. Click the OK button. Then, click the OK (for Windows XP) or Close (for

Windows 2000) button on the IP Filter List window.

Filter List 2: router=>win

7. The New Rule Properties screen will appear, as shown in Figure C-6. Select

the  IP Filter List tab, and make sure that win -> router is highlighted.
Then, click the Add button.

Figure C-6

8. The IP Filter List screen should appear, as shown in Figure C-7. Enter an

appropriate name, such as router->win for the filter list,  and de-select the

Use Add Wizard check box. Click the Add button.

9. The  Filters Properties

screen will appear, as
shown in Figure C-8.
Select the Addressing
tab. In the Source
address field, select A
specific IP Subnet
, and
enter the IP Address:
192.168.1.0 and Subnet
mask:

255.255.255.0.

(Enter your new values if
you have changed the
default settings.) In the
Destination address
field, select My IP
Address
.

Figure C-7

Figure C-8

Содержание BEFVP41 - EtherFast Cable/DSL VPN Router
































































Отзывы: