6. Once you know the Voice Enabler’s IP Address, open your
web browser and type
http://
and then the Voice
Enabler’s IP address that you have written down in the
browser’s Address box. Press Enter. In the example below,
the IP address is 192.168.1.2.
7. A username and password prompt will appear. Leave the
User Name box empty and type
admin
(the default pass-
word) in the Password box. Click OK.
8. The Cable/DSL Voice Enabler ’s Setup page will appear.
9. Configure the following values.
Host Name This field allows you to supply a host name for
the Voice enabler. In most cases, leaving this field blank will
work.
LAN IP Address These values refer to your internal network
settings. You can change the IP Address information of the
Voice Enabler here. Select either Obtain an IP Address
Automatically (if you use DHCP), or select Specify an IP
Address (if you are using a static IP address). If you select
Specify an IP Address, you may have to enter the values for
your Subnet Mask, your Default Gateway Address and
your DNS. Verify that the settings match the TCP/IP settings
of the other computers on your network. If you are unsure
about automatic IP address assignment or static IP addreses,
see the beginning of this section. All values that you enter
here must be compatible with the rest of your network. You
can also set the IP Address for the Voice Enabler using an
attached telephone. For more information, see the beginning
of this section.
Net2Phone Enter the Account Number and the Personal
Identification Number (PIN) that appear on the
Net2Phone/Linksys Rechargeable Calling Card that came in
your Voice Enabler’s box.
6. When you have properly configured the Setup page, click
Apply. The following page will appear, notifying you that all
of your settings have been accepted. From this page you can
either continue with your Voice Enabler’s setup, or you can
link to the Net2Phone/Linksys webpage in order to activate
your Net2Phone account (if your Internet connection is
already configured properly).
7. Activating Your Net2Phone Account.
a. If you have not activated your Net2Phone account
through the Linksys/Net2Phone website, please select the
link that will direct you to this website. (Follow the instruc-
tions to activate your account.) Remember to return here
after you have completed activation and continue from this
step.
b. If you have already activated your account (or do not
wish to activate it at this time), click on Continue.
8. Close the browser window.
Your Cable/DSL Voice Enabler is now configured to your
network and you are ready to make phone calls.
QI-BEFN2PE-10416NC DG
N
No
otte
e::
If you choose not to activate your Net2Phone account now, you
can do it at any time by going to the H
He
ellp
p tab in the Voice Enabler’s
Web-based Utility. You will not be able to make any telephone calls
using the Voice Enabler until you activate your Net2Phone account.
