USB2.0 ICSI Card reader Manual
15
3.4. Installment under Mac 10.2.8 above
Because the diver of card reader have been build in the win Mac, the O.S. will
automatically complete the installment of driver after inserting memory card in the
card reader. You only need to check if the driver of the device was exactly installed.
Please follow the instruction mentioned below to verify completion of the install of
the driver
1. After you plug the card reader into the USB2.0 Port in your PC, the four icons- CF,
No Name and Take ITSO will appear on the screen . Then double click one the of the
icons- including
“
10.3.2
”
,
“
10.2.8
”
and
“
10.1.5
”
-on the screen
（
Deciding to click
which icon depends on what version that you are using. For example, if you use the
Mac 10.3.2 , please click the icon named
“
Mac 10.3.2
”
.
）
Figure 1
2. After double clicking on one of the above mentioned item- 10.1.5 , 10.2.8 and
10.3.2-the screen of
“Application” –
which show as figure2 will present on the
desktop.
