60
3. I/O Setting
a. Input Setting:
IP Camera supports 2 digital input and 1 digital output. When the input
condition is triggered, it can trigger the relay, send the video to mail
addresses /FTP server /SAMBA.
• Interval:
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10 seconds.
• Based on the schedule:
When the option box is ticked, only during the selected schedule time
the I/O is enabled. That is, for example, the 11th hour of Monday has
not been colored in the schedule table, then no action will be triggered
even the camera detects input signal during 11:00~12:00 on Monday.
b. Output Setting:
The output mode affect the DO or relay out duration.
(i) On Off Switch: The camera triggers the external devise and lasts for
10 seconds. You can turn off the alarm manually by click "off" at the
right bottom of the live video page.
(ii) Time Switch: The camera triggers the external devise and lasts for
certain of time according to the interval setting, and the user is not
allowed to break off the alarm manually.
Содержание Link View CDPTZIN1.3MP
Страница 13: ...13 1 2 3 4 5 When it pops up the following dialogue box click Yes...
Страница 31: ...31 use...
