Linkcom Link Gate FAX, Руководство пользователя, Страница: 4 / 9

2. System installation
This device is based on GSM network, so a valid SIM card must be installed before use.
1) Plug one connector of standard phone cable to the phone, and plug the other end to the
port on the panel marked with “telephone” on the back of the device.
2) Plug one connector of standard phone cable to the fax machine, and plug the other end to
the port on the panel marked with “fax machine” on the back of the device.
3) Screw down the connector of the antenna to the bolt stick on the panel marked with
“antenna” on the back of the device.
4) Make sure the switch of device is off, then plug the input connector of the adaptor to the
AC power socket, and the output connector to the “power” port on the back of the
device.
5) The device is in start-up state once the power is switched on. Users can use the device
when the start-up succeeds reflected with the signal indicators on.
3. User Instructions
3.1 Indicator Instructions
1) The power indicator (red) indicates whether the power get through or not. The indicator
light is on when the device is power on; the light is off when the device is turned off.
2) The network indicator (green) indicates whether the device get connected with network
or not. The indicator light flickers slowly with network connected, while it flickers fast
with network disconnected, this indicator is ever light during conversation.
3) The working indicator indicates the current working mode. The indicator light is off in
voice mode while the indicator light is on in fax mode.
4) The signal intensity indicators (green) display the current signal intensity. When the