p.3 | 23
BASIC FEATURES:
Link Gate A Premium is dual band GSM Gate based on Telit GL865 GSM module equipped by a lot of adjustable
features increased comfort of service. It has been designed for GSM network 850/900/1800/1900 MHz.
•
Polarity reversal of telephone line allows exact detection of start and end of call.
•
CLIP support all ordinary protocols and allows send not only incoming call number but also name (when is
saved in phonebook).
•
Call billing allows control exact call duration due tax pulses 12/16 kHz (1. pulse when outgoing call is picked up).
•
Beep in minute period into the call allows easy identification of GSM call.
•
Monitoring system allows sending SMS to preprogrammed number when voltage of backup batterie is low, unit
is logged to GSM network, no picks up number of ringing called person/connected device doesnt react for
ringing) etc.
•
ECHO canceler setting up of local conditions
*Option :
•
USB cable with PC software allows you easy configuration as same as sending and receiving SMS messages
(via SMS mail software)* or data transmission.
•
Sending of status SMS : 1-30 days (adjustable);
Thanks of many Link Gate A Premium features you can satisfy very wide group of customers. By setting of permitted
numbers to memory of Link Gate A Premium you can restrict unrequested calls (to public numbers).As same as you can
set Link Gate A Premium to provides incoming calls only.
INSTALLATION
By pressing of yellow button release the SIM card holder.
Insert the SIM card and replace the SIM card holder. Before inserting the SIM card we recommend checking at various
mobile phone state of the SIM card (logging with or without PIN, PIN, etc.) and set logging without PIN.
When you want logging with PIN you have to pre-programmed this PIN and set logging with PIN (via table of
programming). Without this setting the Gate wont work. DO NOT FORGET ANTENNA CONNECTION! The available
place for installation select up following point of view:
1. Distance from PBX – possibility of GSM interferences to other PBX lines as same as length of line from Gate to PBX
(max. 200m)
2. Main 230 V for power supply of Gate
3. Quality of GSM signals at the installation place of GSM Gate.
