All rights are reserved to Linkcom
classe
DR
classement
LinkDoor
Number
001
date
15/04/05
page
11/31
Accessing the camera
If you set the IP address manually, you can now access the camera’s web interface simply by starting a browser and
entering the IP address.
If you selected Obtain IP address via DHCP, you have several options:
• Reconnect the USB cable, browse to the camera as before, and restart the AXIS Setup Tool. The DHCP-assigned
address will be displayed in the tool.
• If you are using e.g. a home broadband router, you may find it convenient to view the router’s administration pages to
discover which IP address has been assigned to your camera.
Please consult the router’s documentation for further information.
• If your network uses automatic IP addressing (DHCP) and your computer uses the UPnPTM
service, the camera will automatically be detected and displayed on your screen. (UPnPTM isa certification mark of the
UPnPTM Implementers Corporation.)
Set the language and password
When accessing the camera for the first time, the
language can be changed and the “root” password
must be configured.
1. Select the language from the available options, by clicking
the appropriate
flag.
2. Now enter a password and then re-enter it to confirm the
spelling. Click
OK.
3. The ‘Enter Network Password’ dialog will appear. Enter the User name: root
Note: The default administrator user name root is permanent and cannot be deleted.
4. Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be reset to the
factory default settings. See below.
5. If required, click Yes to install the AXIS Media Control (AMC). You will need administrator
rights on the computer to do this.
6. The Live View page of the camera is displayed, with links to the Setup tools that
enable you to customize the camera to your specific needs.