Link4 990-0701-02, Руководство пользователя, Страница: 8 / 15

P/N: 840-0101-00 Revision 1 Page 8 of 15
Connect To the Internet
The iPonic™ 624 Alert comes with a preinstalled Communication
Module . The controller can be used to access the Internet with a
standard CAT 5 cable that can be linked to your router.
Note : The ethernet port for the inter net is inside the iPonic™ 624 Alert.
Before proceeding, make sure the ethernet cable is functioning properly.
Perform the following steps to connect y
our iPonic™ 624 Alert to the
internet:
- Power down the controller
- Open up the hinged door
- Route cable through
opening at the base
- Locate the ethernet port in
the upper left corner
- Plug in the cable to the
ethernet port
- Plug in the other end to
your router
- Close and lock the
controller door
- Power up the controller
Once you’re connected to the
Internet, the controller will
automatically link up to the
Link4
Cloud Server (iponic.link4cloud.com)
and the Server Setup Screen
connection status will display
“Check Account”.
Once you add your controller on the
iPonic Cloud the connection status will
display
OK . Use the instructions
below to access the controller serial
number and registration passcode
which you will need in order to add
your controller to the iPonic Cloud.
- From the Main Menu, Press Soft Button No. 3 or use the
Navigation Menu to highlight System Setup
- Press Soft Button No. 7 or use Navigation Menu to highlight
Communication Setup
- Press Soft Button No. 2 or use Navigation Menu to highlight
Server Setup
- View your Serial Number and Registration Passcode