www.batcafitness.com
17
Link Free Trainer Owner’s Manual
Final Assembly and Troubleshooting
IMPORTANT - Check These Components Before Using Gym:
Wrench Tighten the
set screws on all
Threaded Collars
using an allen
wrench, so that the
set screws tighten
against the shaft.
Refer to Step 2.
Threaded Collar
BFH-50220
Each Free Floater must be threaded at
least 1/2” into the Top Plate of the
weight stack. Each must also be secured
with a 1/2” Jam Nut to ensure a safe
and proper connection.
Verify that all cables lie in between the
guide bolts and the pulleys. Routing the
cables over the guide bolts causes
premature cable wear and will void your
warranty.
Guide Bolts
Record your serial
number on the
front of this
manual and keep
for your records.
The serial number
can be found on the
left side of the
cage as seen in the
figure to the left.
200lb Stack
Weight Stack Decals:
