Link-One L1-RW342, Руководство пользователя

Страница: 80 / 86

Wireless N300 Home Router
76
address is not used by another PC or device. In case that two computers or
devices share the same IP addresses, change either to a different address.
4. Q: I cannot access Internet and send/receive emails; what should I
do?
A: This problem mainly happens to users who use the PPPoE or Dynamic
IP Internet connection type. You need to change the MTU size (1492 by
default). In this case, go to “WAN Settings” to change the MTU value
from default 1480 to 1450 or 1400, etc.
5. Q: How do I share resources on my computer with users on Internet
through the device?
A: To let Internet users access internal servers on your LAN such as e-mail
server, Web, FTP, via the device, use the "Virtual Server" feature. To do so,
follow steps below:
Step 1: Create your internal server, make sure the LAN users can access
these servers and you need to know related service ports, for
example, port number for Web server is 80; FTP is 21; SMTP is 25
and POP3 is 110.
Step 2: Enter Port Forwarding (also called Port Range Forwarding on some
products) screen from device web UI.
Step 3: Complete the Start Port (also called External/Ext Port on some
products) and End Port (also known as Internal/Int Port on some
products) fields, say, 80-80.
Step 5: Input the internal server’s IP address. For example, assuming that
your Web server’s IP address is 192.168. 0.10, then simply input it.
Step 6: Select a proper protocol type: TCP, UDP, or Both depending on
which protocol(s) your internal host is using.
Step 7: Click Enable and save your settings.
For your reference, we collected a list of some well-known service ports as
follows: