LINK-MI LM-WX700, Руководство пользователя

Страница: 12 / 14

- 12 -
Uses your equipment
For Transmitter side
1. Connect your SDI or HDMI video source to the “SDI IN”/”HDMI IN” port of
transmitter (when both SDI and HDMI video are inputted to the transmitter, it will
auto select the SDI video for transmission).
2. If need, you can connect the SDI out(loop through) to other equipment as well
3. Fix the antenna
4. Connect DC power via power cable or insert F970 battery to the transmitter
5. Power on the transmitter
6. Set the Channel
For receiver side
1. Connect “SDI OUT”/”HDMI OUT” port of receiver to monitor or other device.
2. Fix the antenna
3. Connect DC power via power cable or insert V-type battery to the receiver
4. Power on the Receiver
5. Set the Channel (must set both transmitter and receiver to the same channel)
6. After 5-10s, the transmission video will be shown on monitor
Channel setting
Both Transmitter and Receiver were set to same channel in Manufactory. In case, you
want to change to a new channel, please follow the below:
Remark:
Both transmitter and receiver must be set to same one
TX channels changing
Step1: Power on the transmitter
Step2: Press “MENU” button until shown in the unlock icon
on OLED.
Step3: Press “Up” or “DOWN” button to choose channel,then press “MENU” to confirm.
Step4: Transmitter channel setting accomplished.
RX channels changing
Step1: Power on the Receiver
Step2: Press “MENU” button until display unlock icon
.
Step3: Click Left or Right button to choose channel, then click “MENU” to confirm.
Step4: Receiver channel setting accomplished.