6
1
.
Unpacking
Check the host and accessories. Including the host, power cable, remote control, RJ-45 to RS-232
adapter, serial cable, warranty card and manual.
2
.
connecting the cable
Output Connections: The display unit connect with the HDMI interfaces of device's OUTPUT via HDMI
cable; If use an external sound, connect the audio cable to the OUTPUT's A-OUT Interface;
Input connection: input signal that contain USB, HDMI, VGA, AV, USB can access U disk and play the
videos, pictures inside the U disk and so on. Users connect the signal source to be displayed to the
corresponding interfaces inside INPUT box by a cable according to their needs. L, R is the left and right
channel audio with binding Composite video ; A-IN audio bind VGA signal.
RS-232 connection: RJ45 to RS-232 adapter which standard configuration with product access RS232
port of device, then connect with the control computer via RS-232 line.
Power connection: 12V DC power supply which standard configuration with product insert the DC
12V,so the hardware connection is completed, the machine can normal work after setting.
Power on: After connecting the cable above, the configured power adapter of the device insert into an
AC 100-240V power supply, turn on the power switch, power indicator shows green, indicating that the
device is in working condition; red is on standby;on standby state, press the power key of the remote
control to boot and into the normal working condition.
Chapter IV software debugging
After completing the hardware connection, to switch the power on by
of remote control, the red
light is on standby, the green light is turned on. Please setting software through the following steps:
1
.
double-click the
icon to run the control software, interface as follows:
