10
screen frame caused by image distortion and other issues, this
time we also need to set up the parameters of the mosaic through
the menu keys (MENU), so we need to be familiar with the
operation of the menu.
Press the MENU key, then press the left button to press
the left button to come out a few different
Menu 1, 3, 4 categories of the factory has been set as the best
recognized state, do not need to change, we need only to set
menu 2:
1. OSD Language
Move the cursor to OSD Language,press left or right,then user
can choose OSD language.
2. Restore Factory default
Usually do not need to set up, if the user debugging is more
messy, you can try to use the reset factory settings.
3. Mosaic on
Move the cursor to the Mosaic,press left or right to choose open
mosaic or off,same as switch on the remote.
4. Mosaic config 3X3
Press left or right choose different mosaic mode,like
1X2,1X3,1X4,1X5,1X6,1X7,1X8,1X9,2X1,2X2,2X3,2X4,3X1,3X2,3X3,
4X1,4X2,5X1,6X1,7X1,8X1,9X1.such as 1X2 mode,this is meaning
line 1 and row 2.
5. Mosaic mac address 1
The mac address is the machine output interface,if this display
