LINK-MI LM-TV09M, Руководство пользователя

Страница: 9 / 19

7
5
th
Function Description
1. 3x3 Splicing Mode Setting Up Description
(Note: This instruction takes 2x2 splicing as an example, 3 x3 splicing operation
is the same.)

Connect input signal (HDMI, DVI, VGA) to the input port of the splicing box.

Connect the HDMI output of the splicing box to display screen (no need to be in a
certain order Connection).

Press the "MENU" button on the Remote controller or the front panel of the
equipment to call out the splicing menu, select "left" and "right" to position to the
splicing menu (Press "up" and "down" to select corresponding options; Press
"left" and "right" to adjust the parameters).
Select the Splice Config as "2x2", ‘’3x3” or others, see picture below:

Select the HDMI port and the corresponding splice location, adjust according to
the tip of the upper left corner (For example: 2x2 mode, lower right corner unit
HDMI ID is 1, the splicing position is 2, then need to adjust the splicing position
as 4, that is the address of corresponding curtain wall. See picture below: