1
1
th
Installation Instructions
For the safety of you and your equipment, please be sure to read the safety
instructions carefully before using this device.
If you use in the event of doubt, please read this manual first. Detailed
description of the equipment operating in the body. If you still have questions, please
contact us, we will give you a satisfactory answer as soon as possible.
This specification is subject to version changes, without prior notice, please
understand.
Equipment installation, please note the following:
1
. Power supply:
This device uses
100-240V
AC input voltage
,
In order for the device to work properly.
2
. Power:
Equipment is required when moving or other jobs that require power, to turn off all the
power, pull the plug, in order to ensure the safety of you and your equipment.
3
. Cable:
Not in power cable, signal lines, communication lines, such as cable, cables were
crushed or squeeze should be avoided to prevent danger of leakage or short circuit.
4
. Signal cable connections:
Plug from the device, pull the signal line, the device need to power down, so as not to
damage the device. Charge plug damage is not covered under warranty.
5
. Openings:
Outer surface of the device may be cooling holes, do not plug the hole, so as to avoid
heat accumulation and damage equipment or cause a fire risk.
6
. Equipment installation:
Reasonable placement of equipment, such as loading standard rack, chassis, Cabinet, or
placed on a solid, flat work surface to prevent equipment fell.
7
. Environment:
Equipment working environment, pay attention to dust, moisture, especially to prevent
liquids from soaking and splashed into the device.
8
. Maintenance:
All repair work should be done by professional maintenance personnel without training
do not attempt to repair the device yourself. To prevent the risk of electric shock, do
not open the housing.
