manualshive.com logo in svg

Link Communications RLC-4, Руководство пользователя, Страница: 64 / 228

Поделиться
Скачать
Link Communications RLC-4 Скачать руководство пользователя страница 64

4-8

RLC-4 V1.79                 Copyright © 1998 Link Communications Inc.                 9/18/98

Preaccess Tone Timer:

This timer is used to limit how long the preaccess tone will run.  The preaccess tone can also be
stopped by other things, such as a DTMF character being entered on the port the preaccess tone is
being sent out of or the preaccess timer expiring (since indicating that a link has been preaccessed is
what preaccess tone is used for most).  If you want to generate preaccess tone that can't be stopped
by any of these things, use command C040 to generate the tone.
- This timer is programmed in 1Sec increments from 1..9999
- If a timer value of 0 is entered, this timer will never stop the preaccess tone.

Timer Number

Description

Defaults

56

Preaccess Tone Timer, Transmitter 1

8 sec. (8)

57

Preaccess Tone Timer, Transmitter 2

"

58

Preaccess Tone Timer, Transmitter 3

"

59

Preaccess Tone Timer, Transmitter 4

"

Preaccess Timer:

This timer controls how long the "window" of access is between when you enter the preaccess code
and when you have to enter a DTMF digit or be locked out.  It starts running again as soon as each
DTMF digit is released, and will lock you out if it expires.  When it expires, it throws away
whatever DTMF digits have been entered so far and won't accept any more commands until the
controller is accessed again.  It also stops the dial tone when it expires (if it expires before the dial
tone timer does).
- This timer is programmed in 1Sec increments from 1..9999
- If a timer value of 0 is entered, this timer will never expire.

Timer Number

Description

Defaults

60

Preaccess Timer, Port 1

8 sec. (8)

61

Preaccess Timer, Port 2

"

62

Preaccess Timer, Port 3

"

63

Preaccess Timer, Port 4

"

Содержание RLC-4





































































































































































































































Отзывы:

Нет отзывов