Linja Brevik, Руководство по сборке

Страница: 9 / 15

Manual Controller
Temperature / duration setting: Pressing this button takes you to the setting of the desired
temperature. The temperature display starts flashing and can be adjusted using the arrow buttons.
By pressing the button again you switch to the setting for the duration of the sauna session. The time
display starts flashing and can be set.
Press the button again to exit settings. Alternatively, the last step happens automatically after 15
seconds.
If the temperature in the sauna is higher than the set temperature, the LED lights up red and the
heater switches off. If the temperature drops to 2°C below the set temperature, the oven switches on
again and the LED lights up orange.