Linja Brevik, Руководство по сборке

Страница: 7 / 15

Assembly Controller
The display was built into the side wall for safe transport of the sauna.
This must be removed to use the sauna.
To do this, first remove the display surface by applying pressure to the clip on the top.
Remove the 2 temperature sensor wires, black jacketed, and 5 connectors, white jacketed (7 wires
total) from the controller.
Warning
: Be careful not to remove the flat white cable from the display!
Instead of the display, the wooden bracket is built into the sauna wall.
To do this, first pull all cables through the opening in the back of the holder.