Linhai LH40DA Скачать руководство пользователя страница 27

Страница: 27 / 92

LH40DA

OWNER’S/OPERATOR’S

MANUAL

18.0

5. OPERATION WARNINGS

5-10

WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances of losing control of the ATV, which can result in
an accident.

HOW TO AVOID THE HAZARD

Always travel at a speed which is proper for the terrain, visibility and
operating conditions; and your experience.

WARNING

POTENTIAL HAZARD

Attempting wheelies, jumps and other stunts.

WHAT CAN HAPPEN

Increases the chance of an accident, including an overturn.

HOW TO AVOID THE HAZARD

Never attempt stunts, such as wheelies or jumps.

WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before operating.

Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you use it to make sure the ATV is
in safe operating condition.

Always follow the inspection and maintenance procedures and
schedules described in the Owner’s Manual.

Содержание LH40DA





























































































Результаты поиска

Содержание LH40DA

Отзывы:

Linhai LH40DA, Руководство владельца/оператора, Страница: 27 / 92

Результаты поиска

Содержание LH40DA

Отзывы: