Linhai HY740STL 2018, Руководство по обслуживанию

Страница: 83 / 217

CHAPTER 3 ENGINE
M750L SERVICE MANUAL 18.0
CHAPTER 3 ENGINE PAGE 3-
52
torque limiter. The starter torque limiter is
available only as an assembly.
1
）
Set the starter torque limiter to the special
tools and vise.
2
）
Turn the starter torque limiter and check
the slip torque.
Special tool
Starter torque limiter holder(A)
Starter torque limiter socket(B)
Starter torque limiter slip torque
Standard : 41.2-62.8N.m(4.2-6.4kgf-m)
⚫
Starter driven gear bearing
Inspect the starter driven gear bearing for
wear or damage. If necessary, replace it with
a new one.
A.C. MAGNETO ROTOR INSTALLATION
1. Install:
⚫
Starter clutch
1) When inserting the one way clutch(1)into
the guide(2), fit the flange
”A” in the step of
the guide(2).
Note:
Be sure to seat the flange
“A” of the one
way clutch (1) to the guide (2).