Lingo TTV-6, Инструкция по эксплуатации

Страница: 38 / 68

37
TO HEAR VOICE
1. Press the “F1” key to hear the voice of the language
on the top line of display and the “F2” speak key for
the language on the bottom line.
E.g. Input ENG “bookshop”, press [enter] to get German
translation, display shows:
Press “F1” key you can hear the English voice “bookshop”.
Press the “F2” key; you can hear the Spanish voice
“librería”. Press 8 twice to translate to Japanese“
ᧄደ
”,
press “F2” to hear the Japanese voice.
2. Press [enter] key to appear the regulate pronounce
volume menu, Press “Left” or “Right” (
WX
) key to regulate
the volume, then press [enter] key to return to translation
menu.
3. It is with the same procedure to hear the phrases. Press the “F1” key to hear the Entry
Language, the “F2” key to hear the language of translation.
4. The voice volume can be adjusted to a high level that is clear enough in outdoor
environment. However, a medium voice lever is recommended for general learners
to use the translator in indoor environment while the best effect can obtained by using
an earphone (optional accessory).
5. Press “SHIFT” key. When “SHIFT” shows, then press “F1” or “F2” key to continue to
pronounce. Translator can read the words and its translation words which are
showing on the screen, when finished reading all the words showing on the screen, it
can switch to read the next translation of the words, when it finishes reading all the
translations of a same word, it switch to the next word automatically, press any
key stop it. This function can be used in words and phrases translation mode.